Traxxas Hardware kit, Sledge (contains all hardware used on Sledge)
Can be available today
Type | Truggy |
---|---|
Chassis | Aluminium 3.2 mm |
Scale | 1:8 |
Length | 604 mm |
Width | 459 mm |
Height | 214 mm |
Wheelbase | 384 mm |
Ground clearance | 50 mm |
Battery compartment | 181 x 57 x 29/37/45 mm |
Weight | 5.77 kg |
Drive | 4WD |
Engine | Brushless 2000 kv |
Front wheels | SledgeHammer 3.8 / 6.7", hex 17 mm |
Rear wheels | SledgeHammer 3.8 / 6.7", hex 17 mm |
Driving time | 20 - 25 minutes with 2x 3S LiPo 5000 mAh |
Speed | Up to 112 km/h (with optional gear), stock gearing 88 km/h |
Use | Cars |
---|---|
Management | Digital |
Power voltage | 6 - 7.4 V |
Dimensions | Standard |
Weight | 67 g |
Moment | 25 - 35 kg.cm |
Speed | 0.16 - 0.25 s/60° |
Transfers | Metal |
Bearings | 2x Ballbearings |
Engine type | Brush |
Futaba S.BUS | No |
Connector | Universal Futaba |
Tisícihran | 25T |
Cable | 35 cm |
Use | Cars |
---|---|
Type | Brushless inrunner |
Speed | 2000 ot/min/V |
Maximum supply voltage | 6S LiPo |
Dimensions | ø42 x 76 mm |
Shaft | ø5 x 21 mm |
Weight | 406 g |
Connectors | 6.5 mm |
Rotor position sensor | No |
Type | Brushless |
---|---|
Use | Car |
Power supply | 2x 2s/3s LiPol (Max 25.2 V) |
BEC | 5 A |
Length | 72 mm |
Width | 58 mm |
Height | 46 mm |
Weight | 206 g |
Waterproof | Yes |
Castle Live Link | No |
Input for sensors | No |
Internal resistance | 0.00075 Ω |
Engine connectors | 6.5 mm |
Ochrana proti podvybití LiPo | 2-stage indicators, switchable (on or off) |
Thermal protection | 2-stage thermal shutdown |
Ports | RX input, auxiliary fan, Traxxas accessory port |
Number of channels | 5 |
---|---|
Telemetry inputs | RPM, V/T, Telemetry expander |
TSM stabilization | Yes |
Dimensions | 67,0 x 47,0 x 23,0 cm |
---|---|
Weight | 7,350 kg |
Traxxas set of six M3x25 mm countersunk machine screws with hex-drive heads.
Traxxas set of six M2.5x10 mm cap-head machine screws with hex-drive heads.
Traxxas M3x10 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M3x18 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas M3x20 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas M3x25 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x25 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas screws M3x45mm cap-head machine (hex drive). Set of six.
Traxxas M3x8 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas set of six M4x12 mm button-head machine screws with hex-drive heads.
Traxxas M4x12 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M4x15 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas set of six M4x16 mm button-head machine screws with hex-drive heads.
Traxxas M4x20 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M4x25 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M4x35 mm button-head machine screws with hex drive heads. Set of six.
Traxxas set of six M4x6 mm button-head machine screws with hex-drive heads. Screws come with threadlock applied.
Používáme soubory cookies k zajištění funkčnosti webu a s Vaším souhlasem i mj. k personalizaci obsahu našich webových stránek. Kliknutím na tlačítko „Rozumím“ souhlasíte s využívaním cookies a předáním údajů o chování na webu pro zobrazení cílené reklamy na sociálních sítích a reklamních sítích na dalších webech.