Traxxas Ball bearings, black rubber sealed (10x15x4mm) (2)
Can be available today
Type | Monster truck |
---|---|
Chassis | Kompozitní nylon |
Scale | 1:12 |
Length | 345 mm |
Width | 253 mm |
Height | 137 mm |
Wheelbase | 220 mm |
Ground clearance | 27 mm |
Battery compartment | 113 x 41 x 22 mm |
Weight | 1,64 kg |
Engine | Brushless |
Drive | 4WD |
Front wheels | 2.4" wheels (hex 12 mm), tires 4" SledgeHammer |
Rear wheels | 2.4" wheels (hex 12 mm), tires 4" SledgeHammer |
Driving time | 15 - 20 min |
Speed | Up to 48 km/h (factory), up to 80 km/h (with VXL-3s + 3S LiPo) |
Olej tlumičů | 200 cSt |
Olej diferenciálů | F: grease, R: 30k cSt |
Use | Servo for cars |
---|---|
Management | Digital |
Power voltage | 4.8 - 6.0 V |
Dimensions | 20.3 x 40.6 x 36.3 mm |
Weight | 45 g |
Moment | 6.2 kg.cm @ 6.0 V |
Speed | 0.20 s/60° |
Transfers | Nylon |
Bearings | No |
Engine type | Brushed |
Futaba S.BUS | No |
Connector | Universal Futaba |
Tisícihran | 25T |
Cable | 30 cm |
Use | Cars |
---|---|
Type | Brushless inrunner |
Speed | 3300 Kv |
Maximum supply voltage | 2S LiPo |
Dimensions | ø36 x 80 mm |
Shaft | 3 mm |
Connectors | Traxxas Quick Connect |
Rotor position sensor | No |
Bearings | High-speed Ball Bearings |
Type | Brushless |
---|---|
Use | Cars |
Power supply | 2S LiPo / 6-7 cells NiMH |
BEC | Switching, 6 V / 3 A (continuous) 5 A (short-term) |
Length | 59 mm |
Width | 39 mm |
Height | 31 mm |
Weight | 87 g |
Waterproof | Yes |
Castle Live Link | No |
Input for sensors | No |
Teplotní ochrana | Two-stage thermal shutdown |
Ochrana proti podvybití LiPo akumulátoru | Yes |
Ports | Auxiliary fan |
Konektor motoru | Traxxas Quick Connect |
Battery connector | Traxxas iD |
Use | Rc cars |
---|---|
Zone | 2,4 GHZ |
Number of channels | 2 |
Power supply | 4x AA batteries |
Telemetry | No |
Type | LiPol |
---|---|
Article configuration | 3S1P |
Capacity | 2300 mAh |
Tension | 11.1 V |
Length | 110 mm |
Width | 35 mm |
Height | 22 mm |
Load capacity | 57,5 A (25C) |
Charging current | 2,3 A (1C) |
Power connector | Traxxas iD |
Balancer connector | Integrated into power |
Power supply | USB-C |
---|---|
Charging current | 2 A |
Charging power | 20 W |
Number of Li-Po cells | 2 |
Connector | Traxxas iD |
Dimensions | 27,5 x 44,5 x 19,0 cm |
---|---|
Weight | 2,845 kg |
Traxxas set of six M2.5x10 mm cap-head machine screws with hex-drive heads.
Traxxas set of six M2.5x8 mm cap-head machine screws with hex-drive heads.
Traxxas M3x10 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x10 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M3x12 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x14 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x20 mm button-head machine screws with hex drive heads. Set of six.
Traxxas 3x6 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas set of six M3x6 mm flat-head machine screws with hex-drive heads.
Traxxas M3x8 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x8 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas replacement spider gear set for the 6780 center differential and Drag Slash differential. Includes spider gear shafts (2)
Používáme soubory cookies k zajištění funkčnosti webu a s Vaším souhlasem i mj. k personalizaci obsahu našich webových stránek. Kliknutím na tlačítko „Rozumím“ souhlasíte s využívaním cookies a předáním údajů o chování na webu pro zobrazení cílené reklamy na sociálních sítích a reklamních sítích na dalších webech.