Traxxas Ball bearings, blue rubber sealed (10x15x4mm) (2)
Can be available 2.5.2025
Type | On-road |
---|---|
Chassis | Composite nylon |
Scale | 1:10 |
Length | 463 mm |
Width | 200 mm |
Height | 131 mm |
Wheelbase | 257 mm |
Ground clearance | 12 mm |
Battery compartment | 158 x 46 x 23/26 mm |
Weight | 1,52 kg |
Engine | Brushed550 21T |
Drive | 2WD |
Front wheels | 1,9" x 1" (wide), tires 2,7" (69 mm) |
Rear wheels | 1,9" x 1,2" (wide), tires 2,7" (69 mm) |
Driving time | 25 - 30 min |
Speed | Up to 30 km/h |
Olej tlumičů | 200 cSt |
Use | Cars 1:10 |
---|---|
Management | Digital |
Power voltage | 4.8 - 6.0 V |
Dimensions | Standard |
Weight | 42 g |
Moment | 9.0 kg.cm @ 6.0 V |
Speed | 0.17 s/60°@ 6.0 V |
Transfers | Nylon |
Bearings | Yes, 2 ks |
Engine type | Brushed |
Connector | Universal Futaba |
Tisícihran | 25T |
Cable | 30 cm |
Use | Cars |
---|---|
Type | Brushed |
Number of threads | 21 |
Maximum supply voltage | 2S LiPo |
Dimensions | 57 (78) x ø36 mm |
Shaft | 3 mm |
Weight | 240 g |
Connectors | Bullet |
Type | Brushed |
---|---|
Use | Cars |
Power supply | 4-8 cl. NiMH, 2S LiPol |
Current | 14 A (continuous) |
BEC | Linear 6 V / 1 A (continuous) 2 A (short-term) |
Length | 55 mm |
Width | 31.2 mm |
Height | 16 mm |
Weight | 70 g |
Waterproof | Yes |
Input for sensors | No |
Thermal protection | Ano |
PWM frequency | 1400 Hz |
Maximum continuous current | 14 A |
Internal resistance | 7 mΩ pro směr vpřed, 14 mΩ pro zpátečku |
Minimum number of threads | 12 |
Ochrana proti podvybití LiPo | 2-Stage indicators, switchable (on or off) |
Odpor (vpřed) | 0.007 Ω |
Odpor (zpátečka) | 0.014 Ω |
Number of channels | 5 |
---|---|
Telemetry inputs | RPM, V/T, Telemetry expander |
TSM stabilization | Yes |
Dimensions | 58,2 x 23,6 x 18,3 cm |
---|---|
Weight | 3,047 kg |
Traxxas set of six M2.5x10 mm cap-head machine screws with hex-drive heads.
Traxxas set of six M2.5x12 mm cap-head machine screws with hex-drive heads.
Traxxas set of six M2.5x6 mm cap-head machine screws with hex-drive heads.
Traxxas M3x10 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x10 mm cap-head machine screws with hex drive heads. Set of six.
Traxxas M3x10 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M3x12 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x12 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M3x14 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm button-head machine screws with hex drive heads. Set of six.
Traxxas M3x15 mm countersunk machine screws with hex drive heads. Set of six.
Traxxas M3x6 mm button-head machine screws with hex drive heads. Set of six.
Traxxas set of six M3x8 mm flat-head machine screws with hex-drive heads.
Používáme soubory cookies k zajištění funkčnosti webu a s Vaším souhlasem i mj. k personalizaci obsahu našich webových stránek. Kliknutím na tlačítko „Rozumím“ souhlasíte s využívaním cookies a předáním údajů o chování na webu pro zobrazení cílené reklamy na sociálních sítích a reklamních sítích na dalších webech.